skpro.survival.ensemble.SurvGradBoostSkSurv

class skpro.survival.ensemble.SurvGradBoostSkSurv(loss='coxph', learning_rate=0.1, n_estimators=100, subsample=1.0, criterion='friedman_mse', min_samples_split=2, min_samples_leaf=1, min_weight_fraction_leaf=0.0, max_depth=3, min_impurity_decrease=0.0, max_features=None, max_leaf_nodes=None, validation_fraction=0.1, n_iter_no_change=None, tol=0.0001, dropout_rate=0.0, ccp_alpha=0.0, verbose=0, random_state=None)

Gradient-boosted survival trees with proportional hazards loss, from sksurv.

Direct interface to sksurv.ensemble.boosting.GradientBoostingSurvivalAnalysis.

In each stage, a regression tree is fit on the negative gradient of the loss function.

For more details on gradient boosting see [1] and [2]. If loss=’coxph’, the partial likelihood of the proportional hazards model is optimized as described in [3]. If loss=’ipcwls’, the accelerated failure time model with inverse-probability of censoring weighted least squares error is optimized as described in [4]. When using a non-zero dropout_rate, regularization is applied during training following [5].

Parameters:

loss{‘coxph’, ‘squared’, ‘ipcwls’}, optional, default: ‘coxph’

loss function to be optimized. ‘coxph’ refers to partial likelihood loss of Cox’s proportional hazards model. The loss ‘squared’ minimizes a squared regression loss that ignores predictions beyond the time of censoring, and ‘ipcwls’ refers to inverse-probability of censoring weighted least squares error.

learning_ratefloat, optional, default: 0.1

learning rate shrinks the contribution of each tree by learning_rate. There is a trade-off between learning_rate and n_estimators. Values must be in the range [0.0, inf).

n_estimatorsint, default: 100

The number of regression trees to create. Gradient boosting is fairly robust to over-fitting so a large number usually results in better performance. Values must be in the range [1, inf).

subsamplefloat, optional, default: 1.0

The fraction of samples to be used for fitting the individual base learners. If smaller than 1.0 this results in Stochastic Gradient Boosting. subsample interacts with the parameter n_estimators. Choosing subsample < 1.0 leads to a reduction of variance and an increase in bias. Values must be in the range (0.0, 1.0].

criterionstring, optional, “squared_error” or “friedman_mse” (default)

The function to measure the quality of a split. Supported criteria are “friedman_mse” for the mean squared error with improvement score by Friedman, “squared_error” for mean squared error. The default value of “friedman_mse” is generally the best as it can provide a better approximation in some cases.

min_samples_splitint or float, optional, default: 2

The minimum number of samples required to split an internal node:

• If int, values must be in the range [2, inf).

• If float, values must be in the range (0.0, 1.0] and min_samples_split will be ceil(min_samples_split * n_samples).

min_samples_leafint or float, default: 1

The minimum number of samples required to be at a leaf node. A split point at any depth will only be considered if it leaves at least min_samples_leaf training samples in each of the left and right branches. This may have the effect of smoothing the model, especially in regression.

• If int, values must be in the range [1, inf).

• If float, values must be in the range (0.0, 1.0) and min_samples_leaf will be ceil(min_samples_leaf * n_samples).

min_weight_fraction_leaffloat, optional, default: 0.

The minimum weighted fraction of the sum total of weights (of all the input samples) required to be at a leaf node. Samples have equal weight when sample_weight is not provided. Values must be in the range [0.0, 0.5].

max_depthint or None, optional, default: 3

Maximum depth of the individual regression estimators. The maximum depth limits the number of nodes in the tree. Tune this parameter for best performance; the best value depends on the interaction of the input variables. If None, then nodes are expanded until all leaves are pure or until all leaves contain less than min_samples_split samples. If int, values must be in the range [1, inf).

min_impurity_decreasefloat, optional, default: 0.

A node will be split if this split induces a decrease of the impurity greater than or equal to this value.

The weighted impurity decrease equation is the following:

N_t / N * (impurity - N_t_R / N_t * right_impurity
                    - N_t_L / N_t * left_impurity)

where N is the total number of samples, N_t is the number of samples at the current node, N_t_L is the number of samples in the left child, and N_t_R is the number of samples in the right child.

N, N_t, N_t_R and N_t_L all refer to the weighted sum, if sample_weight is passed.

max_featuresint, float, string or None, optional, default: None

The number of features to consider when looking for the best split:

• If int, values must be in the range [1, inf).

• If float, values must be in the range (0.0, 1.0] and the features considered at each split will be max(1, int(max_features * n_features_in_)).

• If ‘sqrt’, then max_features=sqrt(n_features).

• If ‘log2’, then max_features=log2(n_features).

• If None, then max_features=n_features.

Choosing max_features < n_features leads to a reduction of variance and an increase in bias.

Note: the search for a split does not stop until at least one valid partition of the node samples is found, even if it requires to effectively inspect more than max_features features.

max_leaf_nodesint or None, optional, default: None

Grow trees with max_leaf_nodes in best-first fashion. Best nodes are defined as relative reduction in impurity. Values must be in the range [2, inf). If None, then unlimited number of leaf nodes.

validation_fractionfloat, default: 0.1

The proportion of training data to set aside as validation set for early stopping. Values must be in the range (0.0, 1.0). Only used if n_iter_no_change is set to an integer.

n_iter_no_changeint, default: None

n_iter_no_change is used to decide if early stopping will be used to terminate training when validation score is not improving. By default it is set to None to disable early stopping. If set to a number, it will set aside validation_fraction size of the training data as validation and terminate training when validation score is not improving in all of the previous n_iter_no_change numbers of iterations. The split is stratified. Values must be in the range [1, inf).

tolfloat, default: 1e-4

Tolerance for the early stopping. When the loss is not improving by at least tol for n_iter_no_change iterations (if set to a number), the training stops. Values must be in the range [0.0, inf).

dropout_ratefloat, optional, default: 0.0

If larger than zero, the residuals at each iteration are only computed from a random subset of base learners. The value corresponds to the percentage of base learners that are dropped. In each iteration, at least one base learner is dropped. This is an alternative regularization to shrinkage, i.e., setting learning_rate < 1.0. Values must be in the range [0.0, 1.0).

ccp_alphanon-negative float, optional, default: 0.0.

Complexity parameter used for Minimal Cost-Complexity Pruning. The subtree with the largest cost complexity that is smaller than ccp_alpha will be chosen. By default, no pruning is performed. Values must be in the range [0.0, inf).

verboseint, default: 0

Enable verbose output. If 1 then it prints progress and performance once in a while (the more trees the lower the frequency). If greater than 1 then it prints progress and performance for every tree. Values must be in the range [0, inf).

random_stateint seed, RandomState instance, or None, default: None

Controls the random seed given to each Tree estimator at each boosting iteration. In addition, it controls the random permutation of the features at each split. It also controls the random splitting of the training data to obtain a validation set if n_iter_no_change is not None. Pass an int for reproducible output across multiple function calls.

Attributes:

n_estimators_int

The number of estimators as selected by early stopping (if n_iter_no_change is specified). Otherwise it is set to n_estimators.

feature_importances_ndarray, shape = (n_features,)

The feature importances (the higher, the more important the feature).

estimators_ndarray of DecisionTreeRegressor, shape = (n_estimators, 1)

The collection of fitted sub-estimators.

train_score_ndarray, shape = (n_estimators,)

The i-th score train_score_[i] is the deviance (= loss) of the model at iteration i on the in-bag sample. If subsample == 1 this is the deviance on the training data.

oob_improvement_ndarray, shape = (n_estimators,)

The improvement in loss (= deviance) on the out-of-bag samples relative to the previous iteration. oob_improvement_[0] is the improvement in loss of the first stage over the init estimator.

unique_times_array of shape = (n_unique_times,)

Unique time points.

Methods

check_is_fitted([method_name])	Check if the estimator has been fitted.
clone()	Obtain a clone of the object with same hyper-parameters and config.
clone_tags(estimator[, tag_names])	Clone tags from another object as dynamic override.
create_test_instance([parameter_set])	Construct an instance of the class, using first test parameter set.
create_test_instances_and_names([parameter_set])	Create list of all test instances and a list of names for them.
fit(X, y[, C])	Fit regressor to training data.
get_class_tag(tag_name[, tag_value_default])	Get class tag value from class, with tag level inheritance from parents.
get_class_tags()	Get class tags from class, with tag level inheritance from parent classes.
get_config()	Get config flags for self.
get_fitted_params([deep])	Get fitted parameters.
get_param_defaults()	Get object's parameter defaults.
get_param_names([sort])	Get object's parameter names.
get_params([deep])	Get a dict of parameters values for this object.
get_tag(tag_name[, tag_value_default, ...])	Get tag value from instance, with tag level inheritance and overrides.
get_tags()	Get tags from instance, with tag level inheritance and overrides.
get_test_params([parameter_set])	Return testing parameter settings for the estimator.
is_composite()	Check if the object is composed of other BaseObjects.
predict(X)	Predict labels for data from features.
predict_interval([X, coverage])	Compute/return interval predictions.
predict_proba(X)	Predict distribution over labels for data from features.
predict_quantiles([X, alpha])	Compute/return quantile predictions.
predict_var([X])	Compute/return variance predictions.
reset()	Reset the object to a clean post-init state.
set_config(**config_dict)	Set config flags to given values.
set_params(**params)	Set the parameters of this object.
set_random_state([random_state, deep, ...])	Set random_state pseudo-random seed parameters for self.
set_tags(**tag_dict)	Set instance level tag overrides to given values.
update(X, y[, C])	Update regressor with a new batch of training data.

References

[1]

J. H. Friedman, “Greedy function approximation: A gradient boosting machine,” The Annals of Statistics, 29(5), 1189–1232, 2001.

[2]

J. H. Friedman, “Stochastic gradient boosting,” Computational Statistics & Data Analysis, 38(4), 367–378, 2002.

[3]

G. Ridgeway, “The state of boosting,” Computing Science and Statistics, 172–181, 1999.

[4]

Hothorn, T., Bühlmann, P., Dudoit, S., Molinaro, A., van der Laan, M. J., “Survival ensembles”, Biostatistics, 7(3), 355-73, 2006.

[5]

K. V. Rashmi and R. Gilad-Bachrach, “DART: Dropouts meet multiple additive regression trees,” in 18th International Conference on Artificial Intelligence and Statistics, 2015, 489–497.

classmethod get_test_params(parameter_set='default')

Return testing parameter settings for the estimator.

Parameters:

parameter_setstr, default=”default”

Name of the set of test parameters to return, for use in tests. If no special parameters are defined for a value, will return “default” set.

Returns:

paramsdict or list of dict, default = {}

Parameters to create testing instances of the class Each dict are parameters to construct an “interesting” test instance, i.e., MyClass(**params) or MyClass(**params[i]) creates a valid test instance. create_test_instance uses the first (or only) dictionary in params

check_is_fitted(method_name=None)

Check if the estimator has been fitted.

Check if _is_fitted attribute is present and True. The is_fitted attribute should be set to True in calls to an object’s fit method.

If not, raises a NotFittedError.

Parameters:

method_namestr, optional

Name of the method that called this function. If provided, the error message will include this information.

Raises:

NotFittedError

If the estimator has not been fitted yet.

clone()

Obtain a clone of the object with same hyper-parameters and config.

A clone is a different object without shared references, in post-init state. This function is equivalent to returning sklearn.clone of self.

Equivalent to constructing a new instance of type(self), with parameters of self, that is, type(self)(**self.get_params(deep=False)).

If configs were set on self, the clone will also have the same configs as the original, equivalent to calling cloned_self.set_config(**self.get_config()).

Also equivalent in value to a call of self.reset, with the exception that clone returns a new object, instead of mutating self like reset.

Raises:

RuntimeError if the clone is non-conforming, due to faulty __init__.

clone_tags(estimator, tag_names=None)

Clone tags from another object as dynamic override.

Every scikit-base compatible object has a dictionary of tags. Tags may be used to store metadata about the object, or to control behaviour of the object.

Tags are key-value pairs specific to an instance self, they are static flags that are not changed after construction of the object.

clone_tags sets dynamic tag overrides from another object, estimator.

The clone_tags method should be called only in the __init__ method of an object, during construction, or directly after construction via __init__.

The dynamic tags are set to the values of the tags in estimator, with the names specified in tag_names.

The default of tag_names writes all tags from estimator to self.

Current tag values can be inspected by get_tags or get_tag.

Parameters:

estimatorAn instance of :class:BaseObject or derived class

tag_namesstr or list of str, default = None

Names of tags to clone. The default (None) clones all tags from estimator.

Returns:

self

Reference to self.

classmethod create_test_instance(parameter_set='default')

Construct an instance of the class, using first test parameter set.

Parameters:

parameter_setstr, default=”default”

Name of the set of test parameters to return, for use in tests. If no special parameters are defined for a value, will return “default” set.

Returns:

instanceinstance of the class with default parameters

classmethod create_test_instances_and_names(parameter_set='default')

Create list of all test instances and a list of names for them.

Parameters:

parameter_setstr, default=”default”

Name of the set of test parameters to return, for use in tests. If no special parameters are defined for a value, will return “default” set.

Returns:

objslist of instances of cls

i-th instance is cls(**cls.get_test_params()[i])

nameslist of str, same length as objs

i-th element is name of i-th instance of obj in tests. The naming convention is {cls.__name__}-{i} if more than one instance, otherwise {cls.__name__}

fit(X, y, C=None)

Fit regressor to training data.

Writes to self:

Sets fitted model attributes ending in “_”.

Changes state to “fitted” = sets is_fitted flag to True

Parameters:

Xpandas DataFrame

feature instances to fit regressor to

ypd.DataFrame, must be same length as X

labels to fit regressor to

Cpd.DataFrame, optional (default=None)

censoring information for survival analysis, should have same column name as y, same length as X and y should have entries 0 and 1 (float or int) 0 = uncensored, 1 = (right) censored if None, all observations are assumed to be uncensored

Returns:

selfreference to self

classmethod get_class_tag(tag_name, tag_value_default=None)

Get class tag value from class, with tag level inheritance from parents.

Every scikit-base compatible object has a dictionary of tags. Tags may be used to store metadata about the object, or to control behaviour of the object.

Tags are key-value pairs specific to an instance self, they are static flags that are not changed after construction of the object.

The get_class_tag method is a class method, and retrieves the value of a tag taking into account only class-level tag values and overrides.

It returns the value of the tag with name tag_name from the object, taking into account tag overrides, in the following order of descending priority:

1. Tags set in the _tags attribute of the class.

2. Tags set in the _tags attribute of parent classes,

in order of inheritance.

Does not take into account dynamic tag overrides on instances, set via set_tags or clone_tags, that are defined on instances.

To retrieve tag values with potential instance overrides, use the get_tag method instead.

Parameters:

tag_namestr

Name of tag value.

tag_value_defaultany type

Default/fallback value if tag is not found.

Returns:

tag_value

Value of the tag_name tag in self. If not found, returns tag_value_default.

classmethod get_class_tags()

Get class tags from class, with tag level inheritance from parent classes.

Every scikit-base compatible object has a dictionary of tags. Tags may be used to store metadata about the object, or to control behaviour of the object.

Tags are key-value pairs specific to an instance self, they are static flags that are not changed after construction of the object.

The get_class_tags method is a class method, and retrieves the value of a tag taking into account only class-level tag values and overrides.

It returns a dictionary with keys being keys of any attribute of _tags set in the class or any of its parent classes.

Values are the corresponding tag values, with overrides in the following order of descending priority:

1. Tags set in the _tags attribute of the class.

2. Tags set in the _tags attribute of parent classes,

in order of inheritance.

Instances can override these tags depending on hyper-parameters.

To retrieve tags with potential instance overrides, use the get_tags method instead.

Does not take into account dynamic tag overrides on instances, set via set_tags or clone_tags, that are defined on instances.

For including overrides from dynamic tags, use get_tags.

Returns:

collected_tagsdict

Dictionary of tag name : tag value pairs. Collected from _tags class attribute via nested inheritance. NOT overridden by dynamic tags set by set_tags or clone_tags.

get_config()

Get config flags for self.

Configs are key-value pairs of self, typically used as transient flags for controlling behaviour.

get_config returns dynamic configs, which override the default configs.

Default configs are set in the class attribute _config of the class or its parent classes, and are overridden by dynamic configs set via set_config.

Configs are retained under clone or reset calls.

Returns:

config_dictdict

Dictionary of config name : config value pairs. Collected from _config class attribute via nested inheritance and then any overrides and new tags from _onfig_dynamic object attribute.

get_fitted_params(deep=True)

Get fitted parameters.

State required:

Requires state to be “fitted”.

Parameters:

deepbool, default=True

Whether to return fitted parameters of components.

• If True, will return a dict of parameter name : value for this object, including fitted parameters of fittable components (= BaseEstimator-valued parameters).

• If False, will return a dict of parameter name : value for this object, but not include fitted parameters of components.

Returns:

fitted_paramsdict with str-valued keys

Dictionary of fitted parameters, paramname : paramvalue keys-value pairs include:

• always: all fitted parameters of this object, as via get_param_names values are fitted parameter value for that key, of this object

• if deep=True, also contains keys/value pairs of component parameters parameters of components are indexed as [componentname]__[paramname] all parameters of componentname appear as paramname with its value

• if deep=True, also contains arbitrary levels of component recursion, e.g., [componentname]__[componentcomponentname]__[paramname], etc

classmethod get_param_defaults()

Get object’s parameter defaults.

Returns:

default_dict: dict[str, Any]

Keys are all parameters of cls that have a default defined in __init__. Values are the defaults, as defined in __init__.

classmethod get_param_names(sort=True)

Get object’s parameter names.

Parameters:

sortbool, default=True

Whether to return the parameter names sorted in alphabetical order (True), or in the order they appear in the class __init__ (False).

Returns:

param_names: list[str]

List of parameter names of cls. If sort=False, in same order as they appear in the class __init__. If sort=True, alphabetically ordered.

get_params(deep=True)

Get a dict of parameters values for this object.

Parameters:

deepbool, default=True

Whether to return parameters of components.

• If True, will return a dict of parameter name : value for this object, including parameters of components (= BaseObject-valued parameters).

• If False, will return a dict of parameter name : value for this object, but not include parameters of components.

Returns:

paramsdict with str-valued keys

Dictionary of parameters, paramname : paramvalue keys-value pairs include:

• always: all parameters of this object, as via get_param_names values are parameter value for that key, of this object values are always identical to values passed at construction

• if deep=True, also contains keys/value pairs of component parameters parameters of components are indexed as [componentname]__[paramname] all parameters of componentname appear as paramname with its value

• if deep=True, also contains arbitrary levels of component recursion, e.g., [componentname]__[componentcomponentname]__[paramname], etc

get_tag(tag_name, tag_value_default=None, raise_error=True)

Get tag value from instance, with tag level inheritance and overrides.

Every scikit-base compatible object has a dictionary of tags. Tags may be used to store metadata about the object, or to control behaviour of the object.

Tags are key-value pairs specific to an instance self, they are static flags that are not changed after construction of the object.

The get_tag method retrieves the value of a single tag with name tag_name from the instance, taking into account tag overrides, in the following order of descending priority:

1. Tags set via set_tags or clone_tags on the instance,

at construction of the instance.

2. Tags set in the _tags attribute of the class.

3. Tags set in the _tags attribute of parent classes,

in order of inheritance.

Parameters:

tag_namestr

Name of tag to be retrieved

tag_value_defaultany type, optional; default=None

Default/fallback value if tag is not found

raise_errorbool

whether a ValueError is raised when the tag is not found

Returns:

tag_valueAny

Value of the tag_name tag in self. If not found, raises an error if raise_error is True, otherwise it returns tag_value_default.

Raises:

ValueError, if raise_error is True.

The ValueError is then raised if tag_name is not in self.get_tags().keys().

get_tags()

Get tags from instance, with tag level inheritance and overrides.

Every scikit-base compatible object has a dictionary of tags. Tags may be used to store metadata about the object, or to control behaviour of the object.

Tags are key-value pairs specific to an instance self, they are static flags that are not changed after construction of the object.

The get_tags method returns a dictionary of tags, with keys being keys of any attribute of _tags set in the class or any of its parent classes, or tags set via set_tags or clone_tags.

Values are the corresponding tag values, with overrides in the following order of descending priority:

1. Tags set via set_tags or clone_tags on the instance,

at construction of the instance.

2. Tags set in the _tags attribute of the class.

3. Tags set in the _tags attribute of parent classes,

in order of inheritance.

Returns:

collected_tagsdict

Dictionary of tag name : tag value pairs. Collected from _tags class attribute via nested inheritance and then any overrides and new tags from _tags_dynamic object attribute.

is_composite()

Check if the object is composed of other BaseObjects.

A composite object is an object which contains objects, as parameters. Called on an instance, since this may differ by instance.

Returns:

composite: bool

Whether an object has any parameters whose values are BaseObject descendant instances.

property is_fitted

Whether fit has been called.

Inspects object’s _is_fitted` attribute that should initialize to ``False during object construction, and be set to True in calls to an object’s fit method.

Returns:

bool

Whether the estimator has been fit.

property name

Return the name of the object or estimator.

predict(X)

Predict labels for data from features.

State required:

Requires state to be “fitted”.

Accesses in self:

Fitted model attributes ending in “_”

Parameters:

Xpandas DataFrame, must have same columns as X in fit

data to predict labels for

Returns:

ypandas DataFrame, same length as X

labels predicted for X

predict_interval(X=None, coverage=0.9)

Compute/return interval predictions.

If coverage is iterable, multiple intervals will be calculated.

State required:

Requires state to be “fitted”.

Accesses in self:

Fitted model attributes ending in “_”.

Parameters:

Xpandas DataFrame, must have same columns as X in fit

data to predict labels for

coveragefloat or list of float of unique values, optional (default=0.90)

nominal coverage(s) of predictive interval(s)

Returns:

pred_intpd.DataFrame

Column has multi-index: first level is variable name from y in fit, second level coverage fractions for which intervals were computed, in the same order as in input coverage. Third level is string “lower” or “upper”, for lower/upper interval end. Row index is equal to row index of X. Entries are lower/upper bounds of interval predictions, for var in col index, at nominal coverage in second col index, lower/upper depending on third col index, for the row index. Upper/lower interval end are equivalent to quantile predictions at alpha = 0.5 - c/2, 0.5 + c/2 for c in coverage.

predict_proba(X)

Predict distribution over labels for data from features.

State required:

Requires state to be “fitted”.

Accesses in self:

Fitted model attributes ending in “_”

Parameters:

Xpandas DataFrame, must have same columns as X in fit

data to predict labels for

Returns:

yskpro BaseDistribution, same length as X

labels predicted for X

predict_quantiles(X=None, alpha=None)

Compute/return quantile predictions.

If alpha is iterable, multiple quantiles will be calculated.

State required:

Requires state to be “fitted”.

Accesses in self:

Fitted model attributes ending in “_”.

Parameters:

Xpandas DataFrame, must have same columns as X in fit

data to predict labels for

alphafloat or list of float of unique values, optional (default=[0.05, 0.95])

A probability or list of, at which quantile predictions are computed.

Returns:

quantilespd.DataFrame

Column has multi-index: first level is variable name from y in fit, second level being the values of alpha passed to the function. Row index is equal to row index of X. Entries are quantile predictions, for var in col index, at quantile probability in second col index, for the row index.

predict_var(X=None)

Compute/return variance predictions.

State required:

Requires state to be “fitted”.

Accesses in self:

Fitted model attributes ending in “_”.

Parameters:

Xpandas DataFrame, must have same columns as X in fit

data to predict labels for

Returns:

pred_varpd.DataFrame

Column names are exactly those of y passed in fit. Row index is equal to row index of X. Entries are variance prediction, for var in col index. A variance prediction for given variable and fh index is a predicted variance for that variable and index, given observed data.

reset()

Reset the object to a clean post-init state.

Results in setting self to the state it had directly after the constructor call, with the same hyper-parameters. Config values set by set_config are also retained.

A reset call deletes any object attributes, except:

• hyper-parameters = arguments of __init__ written to self, e.g., self.paramname where paramname is an argument of __init__

• object attributes containing double-underscores, i.e., the string “__”. For instance, an attribute named “__myattr” is retained.

• config attributes, configs are retained without change. That is, results of get_config before and after reset are equal.

Class and object methods, and class attributes are also unaffected.

Equivalent to clone, with the exception that reset mutates self instead of returning a new object.

After a self.reset() call, self is equal in value and state, to the object obtained after a constructor call``type(self)(**self.get_params(deep=False))``.

Returns:

self

Instance of class reset to a clean post-init state but retaining the current hyper-parameter values.

set_config(**config_dict)

Set config flags to given values.

Configs are key-value pairs of self, typically used as transient flags for controlling behaviour.

set_config sets dynamic configs, which override the default configs.

Default configs are set in the class attribute _config of the class or its parent classes, and are overridden by dynamic configs set via set_config.

Configs are retained under clone or reset calls.

Parameters:

config_dictdict

Dictionary of config name : config value pairs.

Returns:

selfreference to self.

Notes

Changes object state, copies configs in config_dict to self._config_dynamic.

set_params(**params)

Set the parameters of this object.

The method works on simple skbase objects as well as on composite objects. Parameter key strings <component>__<parameter> can be used for composites, i.e., objects that contain other objects, to access <parameter> in the component <component>. The string <parameter>, without <component>__, can also be used if this makes the reference unambiguous, e.g., there are no two parameters of components with the name <parameter>.

Parameters:

**paramsdict

BaseObject parameters, keys must be <component>__<parameter> strings. __ suffixes can alias full strings, if unique among get_params keys.

Returns:

selfreference to self (after parameters have been set)

set_random_state(random_state=None, deep=True, self_policy='copy')

Set random_state pseudo-random seed parameters for self.

Finds random_state named parameters via self.get_params, and sets them to integers derived from random_state via set_params. These integers are sampled from chain hashing via sample_dependent_seed, and guarantee pseudo-random independence of seeded random generators.

Applies to random_state parameters in self, depending on self_policy, and remaining component objects if and only if deep=True.

Note: calls set_params even if self does not have a random_state, or none of the components have a random_state parameter. Therefore, set_random_state will reset any scikit-base object, even those without a random_state parameter.

Parameters:

random_stateint, RandomState instance or None, default=None

Pseudo-random number generator to control the generation of the random integers. Pass int for reproducible output across multiple function calls.

deepbool, default=True

Whether to set the random state in skbase object valued parameters, i.e., component estimators.

• If False, will set only self’s random_state parameter, if exists.

• If True, will set random_state parameters in component objects as well.

self_policystr, one of {“copy”, “keep”, “new”}, default=”copy”

• “copy” : self.random_state is set to input random_state

• “keep” : self.random_state is kept as is

• “new” : self.random_state is set to a new random state,

derived from input random_state, and in general different from it

Returns:

selfreference to self

set_tags(**tag_dict)

Set instance level tag overrides to given values.

Every scikit-base compatible object has a dictionary of tags. Tags may be used to store metadata about the object, or to control behaviour of the object.

Tags are key-value pairs specific to an instance self, they are static flags that are not changed after construction of the object.

set_tags sets dynamic tag overrides to the values as specified in tag_dict, with keys being the tag name, and dict values being the value to set the tag to.

The set_tags method should be called only in the __init__ method of an object, during construction, or directly after construction via __init__.

Current tag values can be inspected by get_tags or get_tag.

Parameters:

**tag_dictdict

Dictionary of tag name: tag value pairs.

Returns:

Self

Reference to self.

update(X, y, C=None)

Update regressor with a new batch of training data.

Only estimators with the capability:update tag (value True) provide this method, otherwise the method ignores the call and discards the data passed.

State required:

Requires state to be “fitted”.

Writes to self:

Updates fitted model attributes ending in “_”.

Parameters:

Xpandas DataFrame

feature instances to fit regressor to

ypd.DataFrame, must be same length as X

labels to fit regressor to

Cpd.DataFrame, optional (default=None)

censoring information for survival analysis, should have same column name as y, same length as X and y should have entries 0 and 1 (float or int) 0 = uncensored, 1 = (right) censored if None, all observations are assumed to be uncensored

Returns:

selfreference to self